IEC 60335-2-36 Mechanical Durability Test Device For Commercial Induction Cookers
Product information:
The test equipment conforms to the standard requirements of IEC60335-2-36 clause 18.101.
The equipment is used to verify the equipment equipped with induction heating source. The structure should be able to guarantee 100,000 times of normal use without failure that may weaken the requirements of this part. The insulation should not be damaged and the connections should not be loose. The mechanical durability and reliability performance should be tested.
Test principle: The motor drives the mechanical arm to drive pans or equivalent metal objects up and down the induction cooker at a certain speed. At the same time, the induction cooker is turned on and off to simulate its normal use for 10,000 times of life test, and the load voltage is adjustable.
Structure: The equipment consists of an electrical control cabinet (including a load voltage regulator), a rack, and a mechanical arm mounted on the equipment.
Device dimensions: Approximately: 1100×1100×1300 (mm) W×D×H
Device weight: Approximately 150kg
Technical parameters:
| Input power | AC220V 50HZ, 5kW |
| Electrical control | PLC intelligent control |
| Operation interface | 7-inch color touch screen operation |
| Test station | 1 station |
| Test sample range | It can test commercial induction cookers, one cooker at a time, and the maximum sample size allowed is: 800mm wide × 800mm deep × 300mm high, with a base |
| Drive mode | Motor drive |
| Action mode | Up and down movement |
| Saucepan | Or metal plate with equal mass area |
| Mechanical arm | 1 set |
| Movement speed | 0-100mm/s, can be preset on the touch screen, can calculate the speed of the moving time 5s |
| Place residence time | 0-999999s, can be preset on touch screen |
| Number of tests | 0-999999 times, can be preset on touch screen |
| Test frequency | 0-10 times/min can be preset, default is 6 times/min |
| Sample load voltage | 0-250V, adjustable |
| Auxiliary movement mechanism | Linear action press cylinder (optional), matched with switch machine |
| Test items | Mechanical durability test of commercial induction cooker |
| Safety protection device | Leakage protection, overload and short circuit protection |
| Motor | Overload, short circuit protection |
| Test sample |  |
Product Tags:
|
|
IEC 60335-2-36 Mechanical Durability Test Device For Commercial Induction Cookers Images
|
